Router Bit Cases
 Router Bit Cases Small Router Bit CasesHolds 20 1/4' shank and 30 1/2' shank bits. Perfect for storing different categories of bits, including straight, roundover, raised panel door and specialty bits.Large Router Bit CaseHolds 50 1/4' shank and 50 1/2' shank bits. Both have rubber feet on bottom for standing. Router Safety Tips: It is simple to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2' shank router bits whenever possible. 1/2' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here is a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
|
Related items in category: |
Prev. Item Next Item
